SMOK RPM 2 Coil, featuring a 0.6ohm DC MTL Coil, 0.16ohm Mesh Coil, and is installed in a press fit manner, with MTL or DTL options.

SMOK RPM 2 Replacement Coils Features:

SMOK RPM 2 Coil Series
0.6ohm DC MTL Coil – rated for
0.16ohm Mesh Coil – rated for 25-50W
Press Fit Coil Installation
Comes in a pack of five (5).

SMOK RPM 2 COIL Product description

The Smok RPM 2 Coils are available per 5 pieces. The coils can be replaced from the bottom of the pod by pulling them out and pushing a new one in. This makes these coils easy to install in the E-cigarette. In addition, these coils are available for DL use only. That is why an RPM 2 coil is suitable to give off a lot of vapour.

The resistances (ohm)

The Smok RPM 2 Coils are available in two resistors. Below we will explain the different types.

0.16 ohm mesh

Therefore the 0.16 ohm coil is suitable for direct lung use. With this coil you can inhale like a bong. The coil’s annealing coil has a mesh structure for full flavor and lots of vapor. The recommended setting for this coil is 25-50W. Thanks to the mesh annealing coil, the 0.16 ohm RPM 2 Mesh coil gives more taste and vapor than regular coils. We recommend at least 70% VG e-liquid for this coil.

0.6 ohm MTL
The 0.6 ohm RPM 2 coil has a resistor below 1 ohm. Therefore the 0.6 ohm coil is suitable for direct lung or strong mouth to lung use. With this coil you can inhale like a bong or like a cigarette. The recommended setting for this coil is 12-25W. We recommend at least 50% VG e-liquid for this coil.

Where do the Smok RPM 2 coils fit in?

Not every coil fits in every E-cigarette. The Smok RPM 2 coils are suitable for the following products:

Tips for use

Before you can start using the coil it will have to withdraw with e-liquid. You can do this by inserting a few drops of e-liquid into the coil before it is installed and having it briefly retracted. Another option is to install the coil and leave it for 10 minutes so that it can fill with e-liquid. After that, the coil is ready for use. We recommend that you always use the correct ratio of e-liquid and use the recommended settings. As a result, your coil will last longer and you will experience a finer effect. The Smok RPM 2 coil lasts on average 1 to 2 weeks. This depends of course on the use. When the coil tastes burned, it is also in need of replacement. Make sure that there is always enough e-liquid in the tank so that the coil does not burn through.

vape shop in dubai – vape zone uae
Check our main branch in al barsha 1 – Vape Zone